By: FARAONE S.R.L
Stand B 33
It is an aluminum profile shaped as a U, which can be used to make an all-glass balustrade. The Ninfa 4 project was born to establish new records and TO REDUCE THE INSTALLATION TIME with an easy and fast installation: 4 meters in 4 minutes.
Raw aluminum profile extrusion for a glass balustrade, 6060 alloy, anodized or paint, with a tempered laminated glass. The dimensions of the profile are: L95 x H135 mm. Glass assembly is made only from the interior side with fastening screws to adjust the glass. It can be installed laterally, on the ground or even embedded in the ground so that the only visible part will be the glass. The profile comes pre-drilled every 30cm and pre-assembled: for installation, the user just need to drill the floor, fix the profile with the certified provided screws, insert a spacer provided in 1m bar, insert the glass, adjust the glass with a wrench.
The benefits of Ninfa 4 system are the following: scaffolds are not necessary, glass assembly only from the interior side and fastening screws to adjust the glass only from the internal side for onssembly steps. Ninfa 4' glasses don't need a handrail to be adjusted, but this process can be done with a simple wrench. The product is certified for a thrust resistance of 200kg/m with a glass of 8+ 8+1.52 and 300kg/m with a glass 10+0.76/1.52. A LED light can be easily integrated in the profile.